|
|
|
National Stock Number:
5310-01-506-7199
Federal Supply Class:
5310
National Item Identification Number:
015067199
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 101H-040-N-2 | 0FYV4 | ACCURATE SCREW MACHINE CO |
|
Techincal Specification:
| MATERIAL | PLASTIC NYLON OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-A-8625F, TYPE 1, CLASS 2 MIL SPEC 1ST MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | ANODIZE BODY | | CHROMATE SEALING ELEMENT | | CENTER HOLE SHAPE STYLE | ROUND | | HOLE DIAMETER | 0.150 INCHES NOMINAL | | PERIPHERAL SHAPE STYLE | ROUND | | OVERALL DIAMETER | 0.312 INCHES NOMINAL | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | THICKNESS | 0.040 INCHES NOMINAL | | COLOR | GRAY/GREY OVERALL | | SPECIAL FEATURES | WASHER IS HOT WATER SEALED (DK GRAY) |
|
|