|
|
|
National Stock Number:
5310-01-480-8384
Federal Supply Class:
5310
National Item Identification Number:
014808384
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| C365538157N223-010 | 0ZWK8 | MOOG MILITARY AIRCRAFT LLC | | S8157N223-010 | 0ZWK8 | MOOG MILITARY AIRCRAFT LLC |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CRITICALITY CODE JUSTIFICATION | AGAV | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HOLE DIAMETER | 0.620 INCHES MINIMUM AND 0.630 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | | | MATERIAL | | | PART NAME ASSIGNED BY CONTROLLING AGENCY | INAVY: WASHER, SPECIAL; DWG: WASHER, SPECIAL MISCELLANEOUS MATERIAL | | PERIPHERAL SHAPE STYLE | ROUND | | OVERALL DIAMETER | 0.744 INCHES MINIMUM AND 0.747 INCHES MAXIMUM | | THICKNESS | 0.010 INCHES NOMINAL |
|
|