3040-01-474-6425 CYLINDER ASSEMBLY,ACTUATING,LINE Index 4710-01-474-6427 PIPE,PLASTIC

National Stock Number:
5310-01-474-6426

Federal Supply Class:
5310

National Item Identification Number:
014746426

Description:
WASHER,FLAT

Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.


Manufacturer Information:
4M3676301THE BOEING COMPANY
4M36-1101376301THE BOEING COMPANY


Techincal Specification:
MATERIALSTEEL COMP 302 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-5059 MIL SPEC 1ST MATERIAL RESPONSE OR
QQ-S-763 ANNEALED FED SPEC 2ND MATERIAL RESPONSE OR
MIL-S-8506,TYPE 1,ANNEALED MIL SPEC 3RD MATERIAL RESPONSE OVERALL
SURFACE TREATMENTPASSIVATE OVERALL
CENTER HOLE SHAPE STYLEROUND
HOLE DIAMETER1.178 INCHES MINIMUM AND
1.198 INCHES MAXIMUM
PERIPHERAL SHAPE STYLEROUND
OVERALL DIAMETER1.803 INCHES MINIMUM AND
1.823 INCHES MAXIMUM
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
THICKNESS0.090 INCHES NOMINAL
PART NAME ASSIGNED BY CONTROLLING AGENCYNAVY SPECIAL PROJECT


Click here to Register for Free 30-day Trial