|
|
|
National Stock Number:
5310-01-468-5561
Federal Supply Class:
5310
National Item Identification Number:
014685561
Description:
NUT,SLEEVE
Detail:
AN INTERNALLY THREADED ITEM WITH A CYLINDRICAL AND/OR SQUARE, HEXAGONAL, OCTAGONAL, OR DODECAGONAL OUTER PERIPHERY (PARALLEL TO THE THREADED AXIS) A PORTION(S) OF WHICH MAY OR MAY NOT BE ENLARGED, FORMING A FLANGE(S) AND/OR SHOULDER(S). ITEMS NOT HAVING AN ENLARGED OUTER PORTION MAY BE THREADED, A PART OF THE FULL LENGTH, OR TAPPED FROM BOTH ENDS. ITEMS HAVING AN ENLARGED OUTER PORTION (FLANGE(S) OR SHOULDER(S)) MAY BE THREADED THE FULL LENGTH, THREADED A PART OF THE FULL LENGTH, OR TAPPED FROM BOTH ENDS. ITEMS TAPPED FROM BOTH ENDS SHALL HAVE EITHER RIGHT-HAND THREADS ON BOTH ENDS OR LEFT-HAND THREADS ON BOTH ENDS. FOR ITEMS CONFORMING TO ANY OF THE ABOVE AND HAVING A LENGTH OVERALL EXCEEDING TWO TIMES THE LARGEST OUTSIDE DIAMETER OR WIDTH ACROSS FLATS, USE POST, ELECTRICAL-MECHANICAL EQUIPMENT. FOR ITEMS WITH AN OUTSIDE CONTOUR THAT IS THE SAME THE FULL LENGTH, HAVING A CONTINUOUS THREAD THROUGH ITS ENTIRE LENGTH, AND THE LENGTH DOES NOT EXCEED TWO TIMES THE DIAMETER OR WIDTH ACROSS THE FLATS USE NUT (1), PLAIN (AS MODIFIED). EXCLUDES NUT (1), PLAIN, CAP. SEE ALSO TURNBUCKLE BODY.
|
Manufacturer Information:
| B313697 | 16603 | CONTROL FLOW, INC. | | B313697 | 3X894 | CONTROL FLOW, INC. |
|
Techincal Specification:
| THREAD SERIES | UNC | | NOMINAL THREAD SIZE | 0.190 INCHES | | THREAD QUANTITY PER INCH | 32 | | THREAD CLASS | 2B | | THREAD DIRECTION | RIGHT-HAND | | MATERIAL | STEEL CORROSION RESISTING OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763,TYPE 304 FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35,TYPE II FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | NUT STYLE | SLEEVE | | THREAD LENGTH | 0.130 INCHES NOMINAL | | FLANGE DIAMETER | 1.000 INCHES NOMINAL | | FLANGE THICKNESS | 0.180 INCHES MINIMUM AND | | 0.190 INCHES MAXIMUM | | NUT DIAMETER | 0.500 INCHES NOMINAL | | NUT LENGTH | 0.250 INCHES MINIMUM AND | | 0.260 INCHES MAXIMUM | | NUT COUNTERBORE DEPTH | 0.310 INCHES NOMINAL FIRST END | | COUNTERBORE DIAMETER | 0.280 INCHES NOMINAL FIRST END | | CROSS-SECTIONAL SHAPE | ROUND NUT | | BEARING SURFACE FINISH | 125.0 MICROINCHES |
|
|