| DISTANCE FROM APERTURE CENTER TO MOUNTING HOLE CENTER | 0.339 INCHES MINIMUM AND 0.349 INCHES MAXIMUM |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH | 0.686 INCHES MINIMUM AND 0.690 INCHES MAXIMUM |
| COUNTERBORE DIAMETER | 0.194 INCHES MINIMUM FIRST END |
| FEATURES PROVIDED | FLOATING NUT |
| LOCKING FEATURE | PREVAILING TORQUE ALL METAL DESIGN |
| LUBRICATION | DRY FILM LUBRICANT |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5525 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 5732 ASSN STD SINGLE MATERIAL RESPONSE NUT |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5525 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 5732 ASSN STD SINGLE MATERIAL RESPONSE SHELL |
| MATERIAL | IRON ALLOY 660 SHELL |
| MATERIAL | IRON ALLOY 660 NUT |
| MATERIAL | STEEL CORROSION RESISTING CLIP |
| MOUNTING HOLE DIAMETER | 0.098 INCHES MINIMUM AND 0.103 INCHES MAXIMUM |
| MOUNTING HOLE ARRANGEMENT STYLE | 2 HOLES |
| NOMINAL THREAD SIZE | 0.190 INCHES |
| NUT COUNTERBORE DEPTH | 0.437 INCHES MINIMUM FIRST END |
| NUT HEIGHT | 0.620 INCHES MAXIMUM |
| NUT LENGTH | 0.948 INCHES MAXIMUM |
| NUT STYLE | PLATE (FLOATING) |
| PLATE THICKNESS | 0.028 INCHES MINIMUM AND 0.036 INCHES MAXIMUM |
| PLATE WIDTH | 0.474 INCHES NOMINAL |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE NUT |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE SHELL |
| SURFACE TREATMENT | PASSIVATE NUT |
| SURFACE TREATMENT | PASSIVATE SHELL |
| TEMP RATING | 450.0 FAHRENHEIT NOMINAL |
| THREAD CLASS | 3B |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD SERIES | UNIFIED NATIONAL JOINT FINE (UNJF) |
| THREAD QUANTITY PER INCH | 32 |