|
|
|
National Stock Number:
5310-01-435-2360
Federal Supply Class:
5310
National Item Identification Number:
014352360
Description:
NUT,SLEEVE
Detail:
AN INTERNALLY THREADED ITEM WITH A CYLINDRICAL AND/OR SQUARE, HEXAGONAL, OCTAGONAL, OR DODECAGONAL OUTER PERIPHERY (PARALLEL TO THE THREADED AXIS) A PORTION(S) OF WHICH MAY OR MAY NOT BE ENLARGED, FORMING A FLANGE(S) AND/OR SHOULDER(S). ITEMS NOT HAVING AN ENLARGED OUTER PORTION MAY BE THREADED, A PART OF THE FULL LENGTH, OR TAPPED FROM BOTH ENDS. ITEMS HAVING AN ENLARGED OUTER PORTION (FLANGE(S) OR SHOULDER(S)) MAY BE THREADED THE FULL LENGTH, THREADED A PART OF THE FULL LENGTH, OR TAPPED FROM BOTH ENDS. ITEMS TAPPED FROM BOTH ENDS SHALL HAVE EITHER RIGHT-HAND THREADS ON BOTH ENDS OR LEFT-HAND THREADS ON BOTH ENDS. FOR ITEMS CONFORMING TO ANY OF THE ABOVE AND HAVING A LENGTH OVERALL EXCEEDING TWO TIMES THE LARGEST OUTSIDE DIAMETER OR WIDTH ACROSS FLATS, USE POST, ELECTRICAL-MECHANICAL EQUIPMENT. FOR ITEMS WITH AN OUTSIDE CONTOUR THAT IS THE SAME THE FULL LENGTH, HAVING A CONTINUOUS THREAD THROUGH ITS ENTIRE LENGTH, AND THE LENGTH DOES NOT EXCEED TWO TIMES THE DIAMETER OR WIDTH ACROSS THE FLATS USE NUT (1), PLAIN (AS MODIFIED). EXCLUDES NUT (1), PLAIN, CAP. SEE ALSO TURNBUCKLE BODY.
|
Manufacturer Information:
| 754118 | 99167 | HAMILTON SUNDSTRAND CORPORATION |
|
Techincal Specification:
| THREAD SERIES | UNF | | NOMINAL THREAD SIZE | 0.500 INCHES | | THREAD QUANTITY PER INCH | 20 | | THREAD CLASS | 2B | | THREAD DIRECTION | RIGHT-HAND | | MATERIAL | STEEL COMP 303 OR | | STEEL COMP 303 PLUS X OR | | STEEL COMP 303SE OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5640 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | FLANGE DIAMETER | 0.785 INCHES MINIMUM AND | | 0.815 INCHES MAXIMUM | | FLANGE THICKNESS | 0.178 INCHES MINIMUM AND | | 0.198 INCHES MAXIMUM | | NUT DIAMETER | 0.615 INCHES MINIMUM AND | | 0.625 INCHES MAXIMUM | | NUT LENGTH | 0.262 INCHES NOMINAL |
|
|