|
|
|
National Stock Number:
5310-01-434-3796
Federal Supply Class:
5310
National Item Identification Number:
014343796
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| BACW10BP62AP | 81205 | THE BOEING COMPANY | | BACW10BP62P | 10630 | ANILLO INDUSTRIES LLC | | BACW10BP62P | 56878 | SPS TECHNOLOGIES, LLC | | BACW10BP62P | 58009 | MOELLER MANUFACTURING & SUPPLY, LLC | | BACW10BP62P | 6F140 | COMPONENT PRODUCTS CORPORATION | | BACW10BP62P | 81205 | THE BOEING COMPANY |
|
Techincal Specification:
| MATERIAL | STEEL COMP 4130 OR | | STEEL COMP 8630 OR | | STEEL COMP 8735 OR | | STEEL COMP 4135 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-18729 MIL SPEC 1ST MATERIAL RESPONSE OR | | MIL-S-18728 MIL SPEC 2ND MATERIAL RESPONSE OR | | AMS 6357 ASSN STD 3RD MATERIAL RESPONSE OR | | AMS 6352 ASSN STD 4TH MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | NICKEL AND | | CADMIUM OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | AMS 2416 ASSN STD SINGLE TREATMENT RESPONSE OVERALL | | CENTER HOLE SHAPE STYLE | ROUND | | HOLE DIAMETER | 0.407 INCHES MINIMUM AND | | 0.418 INCHES MAXIMUM | | PERIPHERAL SHAPE STYLE | ROUND | | OVERALL DIAMETER | 0.649 INCHES MINIMUM AND | | 0.669 INCHES MAXIMUM | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | THICKNESS | 0.057 INCHES MINIMUM AND | | 0.069 INCHES MAXIMUM | | HARDNESS RATING | 36.0 ROCKWELL C MINIMUM AND | | 40.0 ROCKWELL C MAXIMUM | | SPECIFICATION/STANDARD DATA | 81205-BACW10BP PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
|
|