|
|
|
National Stock Number:
5310-01-434-3336
Federal Supply Class:
5310
National Item Identification Number:
014343336
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| FF-W-92 | 81348 | FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC | | MS14226-64KD516 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HOLE DIAMETER | 0.338 INCHES MINIMUM AND 0.343 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | | | MATERIAL | | | PERIPHERAL SHAPE STYLE | ROUND | | OVERALL DIAMETER | 0.557 INCHES MINIMUM AND 0.582 INCHES MAXIMUM | | SURFACE TREATMENT | ANODIZE OVERALL | | THICKNESS | 0.057 INCHES MINIMUM AND 0.069 INCHES MAXIMUM |
|
|