|
|
|
National Stock Number:
5310-01-430-4740
Federal Supply Class:
5310
National Item Identification Number:
014304740
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| S8157N105-020P | 06848 | HONEYWELL INTERNATIONAL INC | | S8157N105-020P | 2N935 | BOEING DISTRIBUTION SERVICES X, INC. | | S8157N105-020P | 70210 | HONEYWELL INTERNATIONAL INC. |
|
Techincal Specification:
| MATERIAL | STEEL COMP 321 OR | | STEEL COMP 301 OR | | STEEL COMP 302 OR | | STEEL COMP 303 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6721 MIL SPEC 1ST MATERIAL RESPONSE OR | | MIL-S-5059 MIL SPEC 2ND MATERIAL RESPONSE OR | | MIL-S-5059 MIL SPEC 3RD MATERIAL RESPONSE OR | | MIL-S-7720 MIL SPEC 4TH MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | CENTER HOLE SHAPE STYLE | ROUND | | HOLE DIAMETER | 0.510 INCHES MINIMUM AND | | 0.520 INCHES MAXIMUM | | PERIPHERAL SHAPE STYLE | ROUND | | OVERALL DIAMETER | 0.840 INCHES MINIMUM AND | | 0.860 INCHES MAXIMUM | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | THICKNESS | 0.017 INCHES MINIMUM AND | | 0.023 INCHES MAXIMUM |
|
|