|
|
|
National Stock Number:
5310-01-424-3580
Federal Supply Class:
5310
National Item Identification Number:
014243580
Description:
NUT,PLAIN,ROUND
Detail:
A nut, circular in shape, which may have wrenching facilities such as flats, holes, protrusions, slots or splines in or on the periphery or in the face opposite the bearing surface. For items having a thickness (or height) exceeding two times the outside diameter, use POST, ELECTRICAL-MECHANICAL EQUIPMENT. See also NUT (1), PLAIN, KNURLED. (When height or thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance.)
|
Manufacturer Information:
| 752-6406838-100 | 53711 | NAVAL SEA SYSTEMS COMMAND | | 752-7068477-49 | 53711 | NAVAL SEA SYSTEMS COMMAND | | MIL-N-21337 | 81348 | FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC | | H832-1662-49 | 96169 | ELECTRIC BOAT CORPORATION | | MS27955-1 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MS27955-1 | D9182 | ZF INDUSTRIEANTRIEBE WITTEN GMBH |
|
Techincal Specification:
| DRIVE POINT DEPTH | 0.062 INCHES NOMINAL | | DRIVE POINT QUANTITY | 8 | | DRIVE POINT WIDTH | 0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM | | BEARING SURFACE FINISH | 125.0 MICROINCHES | | COUNTERSINK ANGLE | 90.0 DEGREES MINIMUM AND 120.0 DEGREES MAXIMUM BOTH ENDS | | HARDNESS RATING | 26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD ALL MATERIAL RESPONSES OVERALL | | MATERIAL | STEEL COMP 4140 OVERALL | | NOMINAL THREAD SIZE | 0.500 INCHES | | NUT DIAMETER | 1.032 INCHES MINIMUM AND 1.052 INCHES MAXIMUM | | NUT STYLE | ROUND | | NUT THICKNESS | 0.178 INCHES MINIMUM AND 0.198 INCHES MAXIMUM | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | DOD-P-16232, TY Z, CL 3 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | PHOSPHATE ZINC OVERALL | | THREAD CLASS | 3B | | THREAD DIRECTION | RIGHT-HAND | | THREAD SERIES | UNEF | | THREAD QUANTITY PER INCH | 28 |
|
|