|
|
|
National Stock Number:
5310-01-424-1151
Federal Supply Class:
5310
National Item Identification Number:
014241151
Description:
NUT,PLAIN,ROUND
Detail:
A nut, circular in shape, which may have wrenching facilities such as flats, holes, protrusions, slots or splines in or on the periphery or in the face opposite the bearing surface. For items having a thickness (or height) exceeding two times the outside diameter, use POST, ELECTRICAL-MECHANICAL EQUIPMENT. See also NUT (1), PLAIN, KNURLED. (When height or thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance.)
|
Manufacturer Information:
| 211049268 | 53711 | NAVAL SEA SYSTEMS COMMAND | | MS27955-15 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MS27955-15 | D9182 | ZF INDUSTRIEANTRIEBE WITTEN GMBH | | MS27955-4 | D9182 | ZF INDUSTRIEANTRIEBE WITTEN GMBH |
|
Techincal Specification:
| DRIVE POINT DEPTH | 0.0935 INCHES NOMINAL | | DRIVE POINT QUANTITY | 6 | | DRIVE POINT WIDTH | 0.178 INCHES MINIMUM AND 0.198 INCHES MAXIMUM | | HARDNESS RATING | 26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM | | MATERIAL | STEEL OVERALL | | NOMINAL THREAD SIZE | 1.375 INCHES | | NUT DIAMETER | 2.120 INCHES MINIMUM AND 2.140 INCHES MAXIMUM | | NUT THICKNESS | 0.271 INCHES MINIMUM AND 0.291 INCHES MAXIMUM | | SMALL END DIAMETER | 1.875 INCHES MINIMUM AND 1.895 INCHES MAXIMUM | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | D0D-P-16232 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | THREAD CLASS | 3B | | THREAD DIRECTION | RIGHT-HAND | | THREAD SERIES | UNEF | | THREAD QUANTITY PER INCH | 18 |
|
|