| DISTANCE FROM APERTURE CENTER TO MOUNTING HOLE CENTER | 0.557 INCHES MINIMUM AND 0.567 INCHES MAXIMUM |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH | 1.123 INCHES MINIMUM AND 1.127 INCHES MAXIMUM |
| COUNTERBORE DIAMETER | 0.195 INCHES MINIMUM AND 0.200 INCHES MAXIMUM FIRST END |
| LOCKING FEATURE | PREVAILING TORQUE ALL METAL DESIGN |
| LUBRICATION | DRY FILM LUBRICANT |
| MATERIAL | STEEL COMP 4130 OR STEEL COMP 8740 NUT |
| MATERIAL | STEEL COMP 631 SHELL |
| MOUNTING HOLE DIAMETER | 0.098 INCHES MINIMUM AND 0.103 INCHES MAXIMUM |
| MOUNTING HOLE ARRANGEMENT STYLE | 2 HOLES |
| NOMINAL THREAD SIZE | 0.190 INCHES |
| NUT COUNTERBORE DEPTH | 0.208 INCHES MINIMUM AND 0.218 INCHES MAXIMUM FIRST END |
| NUT LENGTH | 1.365 INCHES MINIMUM AND 1.385 INCHES MAXIMUM |
| NUT MOUNTING PROVISION | STRAIGHT HOLES |
| NUT STYLE | PLATE (FLOATING) |
| NUT HEIGHT | 0.865 INCHES MAXIMUM |
| PLATE THICKNESS | 0.023 INCHES MINIMUM AND 0.027 INCHES MAXIMUM |
| PLATE WIDTH | 0.866 INCHES MAXIMUM |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE SHELL |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416, TY2 CL2 FED SPEC SINGLE TREATMENT RESPONSE NUT |
| SURFACE TREATMENT | CADMIUM AND CHROMATE NUT |
| SURFACE TREATMENT | PASSIVATE SHELL |
| THREAD CLASS | 3B |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD SERIES | UNIFIED NATIONAL JOINT FINE (UNJF) |
| THREAD QUANTITY PER INCH | 32 |