|
|
|
National Stock Number:
5310-01-417-8595
Federal Supply Class:
5310
National Item Identification Number:
014178595
Description:
WASHER,RECESSED
Detail:
A WASHER OF ANY PERIPHERAL SHAPE HAVING A CENTRALLY LOCATED HOLE. BOTH BEARING SURFACES ARE PARALLEL AND FLAT, BUT ONE OR BOTH OF THE BEARING SURFACES MUST BE BROKEN BY A COUNTERBORE, COUNTERSINK, OR SIMILARLY SHAPED RECESS. THE THICKNESS MUST NOT EXCEED 25 PER CENT OF THE OUTSIDE DIAMETER OR THE LARGEST OUTSIDE DIMENSION. THE MAXIMUM LIMIT OF THE TOLERANCE OR RANGE APPLIED TO THE THICKNESS AND/OR LARGEST OUTSIDE DIMENSION MUST BE USED TO DETERMINE COMPLIANCE. EXCLUDES WASHER, CONCAVE, RETAINER, PACKING, AND THRUST TYPE WASHERS. SEE ALSO SPACER, SLEEVE; AND SPACER, STEPPED.
|
Manufacturer Information:
| 4D0033C8 | 10630 | ANILLO INDUSTRIES LLC | | 4D0033C8 | 58009 | MOELLER MANUFACTURING & SUPPLY, LLC | | 4D0033C8 | 88277 | THE BOEING COMPANY |
|
Techincal Specification:
| MATERIAL | IRON ALLOY 660 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5525 ASSN STD SINGLE MATERIAL RESPONSE OR | | AMS 5732 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | HARDNESS RATING | 36.0 ROCKWELL C MINIMUM AND | | 45.0 ROCKWELL C MAXIMUM | | STYLE DESIGNATOR | RECESSED | | HOLE DIAMETER | 0.501 INCHES MINIMUM AND | | 0.505 INCHES MAXIMUM | | OUTSIDE DIAMETER | 0.922 INCHES MINIMUM AND | | 0.932 INCHES MAXIMUM | | RECESS DIAMETER | 0.614 INCHES MINIMUM AND | | 0.624 INCHES MAXIMUM | | MATERIAL THICKNESS | 0.071 INCHES MINIMUM AND | | 0.085 INCHES MAXIMUM | | RECESS ANGLE | 90.0 DEGREES NOMINAL |
|
|