|
|
|
National Stock Number:
5310-01-416-4701
Federal Supply Class:
5310
National Item Identification Number:
014164701
Description:
NUT,PLAIN,ROUND
Detail:
A nut, circular in shape, which may have wrenching facilities such as flats, holes, protrusions, slots or splines in or on the periphery or in the face opposite the bearing surface. For items having a thickness (or height) exceeding two times the outside diameter, use POST, ELECTRICAL-MECHANICAL EQUIPMENT. See also NUT (1), PLAIN, KNURLED. (When height or thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance.)
|
Manufacturer Information:
| NAS1493-9F | 80203 | GABRIEL ELECTRONICS INC |
|
Techincal Specification:
| THREAD SERIES | UNS | | NOMINAL THREAD SIZE | 1.563 INCHES | | THREAD QUANTITY PER INCH | 18 | | THREAD PITCH DIAMETERS | 1.5269 TO 1.5314 INCHES | | THREAD DIRECTION | RIGHT-HAND | | MATERIAL | STEEL COMP 4130 OVERALL | | SURFACE TREATMENT | OXIDE OVERALL | | HARDNESS RATING | 26.0 ROCKWELL C MINIMUM AND | | 33.0 ROCKWELL C MAXIMUM | | NUT STYLE | ROUND | | SMALL END DIAMETER | 1.819 INCHES MINIMUM AND | | 1.824 INCHES MAXIMUM | | DRIVE POINT DEPTH | 0.050 INCHES MINIMUM AND | | 0.060 INCHES MAXIMUM | | NUT DIAMETER | 1.906 INCHES MINIMUM AND | | 1.916 INCHES MAXIMUM | | NUT THICKNESS | 0.281 INCHES MINIMUM AND | | 0.286 INCHES MAXIMUM | | DRIVE POINT WIDTH | 0.250 INCHES MINIMUM AND | | 0.260 INCHES MAXIMUM | | UNDERCUT THICKNESS | 0.100 INCHES MINIMUM AND | | 0.105 INCHES MAXIMUM | | DRIVE POINT QUANTITY | 8 | | COUNTERSINK ANGLE | 89.5 DEGREES MINIMUM AND | | 90.5 DEGREES MAXIMUM NUT |
|
|