|
|
|
National Stock Number:
5310-01-415-8866
Federal Supply Class:
5310
National Item Identification Number:
014158866
Description:
NUT,SLEEVE
Detail:
AN INTERNALLY THREADED ITEM WITH A CYLINDRICAL AND/OR SQUARE, HEXAGONAL, OCTAGONAL, OR DODECAGONAL OUTER PERIPHERY (PARALLEL TO THE THREADED AXIS) A PORTION(S) OF WHICH MAY OR MAY NOT BE ENLARGED, FORMING A FLANGE(S) AND/OR SHOULDER(S). ITEMS NOT HAVING AN ENLARGED OUTER PORTION MAY BE THREADED, A PART OF THE FULL LENGTH, OR TAPPED FROM BOTH ENDS. ITEMS HAVING AN ENLARGED OUTER PORTION (FLANGE(S) OR SHOULDER(S)) MAY BE THREADED THE FULL LENGTH, THREADED A PART OF THE FULL LENGTH, OR TAPPED FROM BOTH ENDS. ITEMS TAPPED FROM BOTH ENDS SHALL HAVE EITHER RIGHT-HAND THREADS ON BOTH ENDS OR LEFT-HAND THREADS ON BOTH ENDS. FOR ITEMS CONFORMING TO ANY OF THE ABOVE AND HAVING A LENGTH OVERALL EXCEEDING TWO TIMES THE LARGEST OUTSIDE DIAMETER OR WIDTH ACROSS FLATS, USE POST, ELECTRICAL-MECHANICAL EQUIPMENT. FOR ITEMS WITH AN OUTSIDE CONTOUR THAT IS THE SAME THE FULL LENGTH, HAVING A CONTINUOUS THREAD THROUGH ITS ENTIRE LENGTH, AND THE LENGTH DOES NOT EXCEED TWO TIMES THE DIAMETER OR WIDTH ACROSS THE FLATS USE NUT (1), PLAIN (AS MODIFIED). EXCLUDES NUT (1), PLAIN, CAP. SEE ALSO TURNBUCKLE BODY.
|
Manufacturer Information:
| 6397526 0A-115 | 53711 | NAVAL SEA SYSTEMS COMMAND | | 803-6397426-0A-115 | 53711 | NAVAL SEA SYSTEMS COMMAND |
|
Techincal Specification:
| THREAD SERIES | UNC | | NOMINAL THREAD SIZE | 0.750 INCHES | | THREAD QUANTITY PER INCH | 10 | | THREAD CLASS | 2B | | THREAD DIRECTION | RIGHT-HAND | | MATERIAL | NICKEL ALLOY 400 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-N-281, CLA FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | NUT STYLE | SLEEVE | | NUT DIAMETER | 1.120 INCHES MINIMUM AND | | 1.130 INCHES MAXIMUM | | NUT LENGTH | 0.290 INCHES MINIMUM AND | | 0.330 INCHES MAXIMUM | | BOSS DIAMETER | 0.920 INCHES MINIMUM AND | | 0.960 INCHES MAXIMUM | | BOSS THICKNESS | 0.170 INCHES MINIMUM AND | | 0.210 INCHES MAXIMUM | | CROSS-SECTIONAL SHAPE | ROUND NUT | | SPECIAL FEATURES | FOUR HOLES LOCATED ALONG THE FLANGE DIAMETER EACH WITH A OD OF .200 INCHES |
|
|