|
|
|
National Stock Number:
5310-01-414-2845
Federal Supply Class:
5310
National Item Identification Number:
014142845
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 2180732 PC 10 | 80064 | NAVAL SHIP SYSTEMS COMMAND | | 2180732 PC 10SS | 03950 | NAVAL INVENTORY CONTROL POINT MECHANICSBURG | | 845-2180732 PC 10SS | 03950 | NAVAL INVENTORY CONTROL POINT MECHANICSBURG | | 845-2180732 PC 10 | 80064 | NAVAL SHIP SYSTEMS COMMAND |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CRITICALITY CODE JUSTIFICATION | ZZZY | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HOLE DIAMETER | 1.656 INCHES NOMINAL | | OVERALL DIAMETER | 2.594 INCHES NOMINAL | | MATERIAL | PLASTIC NYLON OVERALL | | PERIPHERAL SHAPE STYLE | ROUND | | REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS | QUALITY CONTROL IN ACCORDANCE WITH NAVSHIPS 0948-045-7010 MATERIAL IDENTIFICATION AND CONTROL INSTRUCTION FOR SUBSAFE ITEMS | | THICKNESS | 0.125 INCHES NOMINAL |
|