|
|
|
National Stock Number:
5310-01-413-5492
Federal Supply Class:
5310
National Item Identification Number:
014135492
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 930-22875 | 04801 | L3HARRIS MARITIME POWER & ENERGY SOLUTIONS, INC |
|
Techincal Specification:
| SURFACE TREATMENT | COPPER OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-14550 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL | | CENTER HOLE SHAPE STYLE | ROUND | | HOLE DIAMETER | 0.522 INCHES MINIMUM AND | | 0.542 INCHES MAXIMUM | | PERIPHERAL SHAPE STYLE | ROUND | | OVERALL DIAMETER | 1.850 INCHES MINIMUM AND | | 1.910 INCHES MAXIMUM | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | THICKNESS | 0.124 INCHES MINIMUM AND | | 0.144 INCHES MAXIMUM |
|
|