|
|
|
National Stock Number:
5310-01-412-5448
Federal Supply Class:
5310
National Item Identification Number:
014125448
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 10714-00 | D9182 | ZF INDUSTRIEANTRIEBE WITTEN GMBH | | 178147-01 | 09455 | RBC TRANSPORT DYNAMICS CORP | | 9206M79P01 | 00986 | CHROMALLOY GAS TURBINE LLC | | 9206M79P01 | 07482 | GENERAL ELECTRIC COMPANY | | 5310PL0832554 | 9009H | INSPEKTORAT WSPARCIA SIL ZBROJNYCH | | 9206M79P01 | D9182 | ZF INDUSTRIEANTRIEBE WITTEN GMBH | | 9206M79P09 | 07482 | GENERAL ELECTRIC COMPANY | | 9206M79P09 | 09455 | RBC TRANSPORT DYNAMICS CORP | | 9206M79P09 | D9182 | ZF INDUSTRIEANTRIEBE WITTEN GMBH |
|
Techincal Specification:
| MATERIAL | PLASTIC OVERALL | | CENTER HOLE SHAPE STYLE | ROUND | | HOLE DIAMETER | 1.350 INCHES MINIMUM AND | | 1.355 INCHES MAXIMUM | | PERIPHERAL SHAPE STYLE | ROUND W/FLATS | | OVERALL DIAMETER | 1.901 INCHES MINIMUM AND | | 1.905 INCHES MAXIMUM | | WIDTH ACROSS FLATS | 1.802 INCHES NOMINAL | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | THICKNESS | 0.035 INCHES MINIMUM AND | | 0.040 INCHES MAXIMUM | | SPEC/STD CONTROLLING DATA | | | MANUFACTURERS CODE | 07482 | | MFR SOURCE CONTROLLING REFERENCE | 9206M79P01 |
|
|