| DISTANCE FROM BASE TO CENTER OF APERTURE | 0.205 INCHES MINIMUM AND 0.215 INCHES MAXIMUM |
| DISTANCE FROM MOUNTING HOLE CENTER TO BASE | 0.370 INCHES MINIMUM AND 0.380 INCHES MAXIMUM |
| BEARING SURFACE FINISH | 125.0 MICROINCHES |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH | 0.217 INCHES MINIMUM AND 0.221 INCHES MAXIMUM |
| FEATURES PROVIDED | FLOATING NUT |
| HARDNESS RATING | 49.0 ROCKWELL C MAXIMUM |
| LOCKING FEATURE | PREVAILING TORQUE ALL METAL DESIGN |
| LUBRICATION | DRY FILM LUBRICANT |
| OVERALL HEIGHT | 0.250 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5525 ASSN STD 1ST MATERIAL RESPONSE OR AMS 5732 ASSN STD 1ST MATERIAL RESPONSE OR AMS 5737 ASSN STD 1ST MATERIAL RESPONSE NUT |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5510 ASSN STD 2ND MATERIAL RESPONSE SHELL |
| MATERIAL | IRON ALLOY 660 NUT |
| MATERIAL | STEEL COMP 321 SHELL |
| MOUNTING HOLE ARRANGEMENT STYLE | 2 HOLES |
| MOUNTING HOLE DIAMETER | 0.098 INCHES MINIMUM AND 0.103 INCHES MAXIMUM |
| NOMINAL THREAD SIZE | 0.190 INCHES |
| NUT HEIGHT | 0.250 INCHES MAXIMUM |
| NUT MOUNTING PROVISION | STRAIGHT HOLES |
| NUT STYLE | PLATE |
| NUT LENGTH | 0.734 INCHES MAXIMUM |
| PLATE THICKNESS | 0.027 INCHES MINIMUM AND 0.042 INCHES MAXIMUM |
| PLATE WIDTH | 0.415 INCHES MAXIMUM |
| SURFACE TREATMENT | PASSIVATE OVERALL |
| TEMP RATING | 450.0 FAHRENHEIT NOMINAL |
| THREAD CLASS | 3B |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD QUANTITY PER INCH | 32 |
| THREAD SERIES | UNIFIED NATIONAL JOINT FINE (UNJF) |