| DISTANCE FROM APERTURE CENTER TO MOUNTING HOLE CENTER | 0.495 INCHES MINIMUM AND 0.505 INCHES MAXIMUM |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH | 0.310 INCHES MINIMUM AND 0.314 INCHES MAXIMUM |
| COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM NUT |
| HARDNESS RATING | 49.0 ROCKWELL C MAXIMUM |
| LOCKING FEATURE | PREVAILING TORQUE ALL METAL DESIGN |
| OVERALL HEIGHT | 0.340 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5525 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 5732 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 5737 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | IRON ALLOY 660 OVERALL |
| MOUNTING HOLE DIAMETER | 0.098 INCHES MINIMUM AND 0.103 INCHES MAXIMUM |
| MOUNTING HOLE ARRANGEMENT STYLE | 2 HOLES |
| NOMINAL THREAD SIZE | 0.250 INCHES |
| NUT HEIGHT | 0.340 INCHES MAXIMUM |
| NUT STYLE | PLATE |
| NUT LENGTH | 1.252 INCHES MAXIMUM |
| NUT MOUNTING PROVISION | STRAIGHT HOLES |
| PLATE WIDTH | 0.535 INCHES MINIMUM AND 0.619 INCHES MAXIMUM |
| PLATE THICKNESS | 0.055 INCHES MAXIMUM |
| PRECIOUS MATERIAL AND LOCATION | ON NUT SILVER |
| PRECIOUS MATERIAL | SILVER |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | AMS 2410 ASSN STD SINGLE TREATMENT RESPONSE OVERALL |
| SURFACE TREATMENT | SILVER OVERALL |
| TEMP RATING | 800.0 FAHRENHEIT MAXIMUM |
| THREAD CLASS | 3B |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD QUANTITY PER INCH | 28 |
| THREAD SERIES | UNIFIED NATIONAL JOINT FINE (UNJF) |