|
|
|
National Stock Number:
5310-01-390-1148
Federal Supply Class:
5310
National Item Identification Number:
013901148
Description:
NUT,SLEEVE
Detail:
AN INTERNALLY THREADED ITEM WITH A CYLINDRICAL AND/OR SQUARE, HEXAGONAL, OCTAGONAL, OR DODECAGONAL OUTER PERIPHERY (PARALLEL TO THE THREADED AXIS) A PORTION(S) OF WHICH MAY OR MAY NOT BE ENLARGED, FORMING A FLANGE(S) AND/OR SHOULDER(S). ITEMS NOT HAVING AN ENLARGED OUTER PORTION MAY BE THREADED, A PART OF THE FULL LENGTH, OR TAPPED FROM BOTH ENDS. ITEMS HAVING AN ENLARGED OUTER PORTION (FLANGE(S) OR SHOULDER(S)) MAY BE THREADED THE FULL LENGTH, THREADED A PART OF THE FULL LENGTH, OR TAPPED FROM BOTH ENDS. ITEMS TAPPED FROM BOTH ENDS SHALL HAVE EITHER RIGHT-HAND THREADS ON BOTH ENDS OR LEFT-HAND THREADS ON BOTH ENDS. FOR ITEMS CONFORMING TO ANY OF THE ABOVE AND HAVING A LENGTH OVERALL EXCEEDING TWO TIMES THE LARGEST OUTSIDE DIAMETER OR WIDTH ACROSS FLATS, USE POST, ELECTRICAL-MECHANICAL EQUIPMENT. FOR ITEMS WITH AN OUTSIDE CONTOUR THAT IS THE SAME THE FULL LENGTH, HAVING A CONTINUOUS THREAD THROUGH ITS ENTIRE LENGTH, AND THE LENGTH DOES NOT EXCEED TWO TIMES THE DIAMETER OR WIDTH ACROSS THE FLATS USE NUT (1), PLAIN (AS MODIFIED). EXCLUDES NUT (1), PLAIN, CAP. SEE ALSO TURNBUCKLE BODY.
|
Manufacturer Information:
| 10214 | 99866 | HONEYWELL INTERNATIONAL INC. | | 568-10214 | 99866 | HONEYWELL INTERNATIONAL INC. | | 92090506 | 0AC45 | THE CORPORATION OF MERCER UNIVERSITY |
|
Techincal Specification:
| THREAD SERIES | UNEF | | NOMINAL THREAD SIZE | 0.500 INCHES | | THREAD QUANTITY PER INCH | 28 | | THREAD CLASS | 2B | | THREAD DIRECTION | RIGHT-HAND | | MATERIAL | ALUMINUM ALLOY 2011 OVERALL | | SURFACE TREATMENT | CADMIUM AND | | CHROMATE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | NUT STYLE | SLEEVE | | FLANGE THICKNESS | 0.150 INCHES NOMINAL | | NUT DIAMETER | 0.560 INCHES NOMINAL | | NUT LENGTH | 0.350 INCHES NOMINAL | | FLANGE WIDTH ACROSS FLATS | 0.620 INCHES NOMINAL | | CROSS-SECTIONAL SHAPE | HEXAGONAL NUT | | SPECIAL FEATURES | PART OF NUT SURFACE TO BE KNURLED;TWO WIRE HOLES LOCATED ON NUT FLANGE;EACH HOLE HAS A OUTSIDE DIAMETER OF .062 MIN AN .065 MAX |
|
|