|
|
|
National Stock Number:
5310-01-389-7988
Federal Supply Class:
5310
National Item Identification Number:
013897988
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 1"ODX0.438"IDX0 .083"THK CRES 3 | D9182 | ZF INDUSTRIEANTRIEBE WITTEN GMBH | | 1"ODX0.438"IDX0 .083"THK CRES 3 | D9182 | ZF INDUSTRIEANTRIEBE WITTEN GMBH | | MS15795-815 | 80205 | NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE | | MS15795-815 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MS15795-815 CRE S 316 | D9182 | ZF INDUSTRIEANTRIEBE WITTEN GMBH | | 1'ODX0.438'IDX0 .083'THK CRES 3 | D9182 | ZF INDUSTRIEANTRIEBE WITTEN GMBH |
|
Techincal Specification:
| MATERIAL | STEEL COMP 316 OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | CENTER HOLE SHAPE STYLE | ROUND | | HOLE DIAMETER | 0.433 INCHES MINIMUM AND | | 0.453 INCHES MAXIMUM | | PERIPHERAL SHAPE STYLE | ROUND | | OVERALL DIAMETER | 0.993 INCHES MINIMUM AND | | 1.030 INCHES MAXIMUM | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | THICKNESS | 0.064 INCHES MINIMUM AND | | 0.104 INCHES MAXIMUM | | DEPARTURE FROM CITED DOCUMENT | ASMODIFIED BY MATERIAL |
|
|