|
|
|
National Stock Number:
5310-01-389-7637
Federal Supply Class:
5310
National Item Identification Number:
013897637
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 1.375ODX0.562ID X0.109THK CRES3 | D9182 | ZF INDUSTRIEANTRIEBE WITTEN GMBH | | 5310PL0994176 | 9009H | INSPEKTORAT WSPARCIA SIL ZBROJNYCH | | D50668 ITEM 29 | 34889 | HUNT VALVE COMPANY INC | | 709-5486672 PC114 | 43689 | HUNTINGTON INGALLS INC | | 608-7120913 ITEM 68 | 53711 | NAVAL SEA SYSTEMS COMMAND | | MS15795-819 | 80205 | NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE | | MS15795-819 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MS15795-819 CRE S 316 | D9182 | ZF INDUSTRIEANTRIEBE WITTEN GMBH |
|
Techincal Specification:
| MATERIAL | STEEL COMP 316 OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | CENTER HOLE SHAPE STYLE | ROUND | | HOLE DIAMETER | 0.557 INCHES MINIMUM AND | | 0.577 INCHES MAXIMUM | | PERIPHERAL SHAPE STYLE | ROUND | | OVERALL DIAMETER | 1.368 INCHES MINIMUM AND | | 1.405 INCHES MAXIMUM | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | THICKNESS | 0.086 INCHES MINIMUM AND | | 0.132 INCHES MAXIMUM | | DEPARTURE FROM CITED DOCUMENT | AS MODIFIED BY MATERIAL |
|