|
|
|
National Stock Number:
5310-01-388-1593
Federal Supply Class:
5310
National Item Identification Number:
013881593
Description:
NUT,SLEEVE
Detail:
AN INTERNALLY THREADED ITEM WITH A CYLINDRICAL AND/OR SQUARE, HEXAGONAL, OCTAGONAL, OR DODECAGONAL OUTER PERIPHERY (PARALLEL TO THE THREADED AXIS) A PORTION(S) OF WHICH MAY OR MAY NOT BE ENLARGED, FORMING A FLANGE(S) AND/OR SHOULDER(S). ITEMS NOT HAVING AN ENLARGED OUTER PORTION MAY BE THREADED, A PART OF THE FULL LENGTH, OR TAPPED FROM BOTH ENDS. ITEMS HAVING AN ENLARGED OUTER PORTION (FLANGE(S) OR SHOULDER(S)) MAY BE THREADED THE FULL LENGTH, THREADED A PART OF THE FULL LENGTH, OR TAPPED FROM BOTH ENDS. ITEMS TAPPED FROM BOTH ENDS SHALL HAVE EITHER RIGHT-HAND THREADS ON BOTH ENDS OR LEFT-HAND THREADS ON BOTH ENDS. FOR ITEMS CONFORMING TO ANY OF THE ABOVE AND HAVING A LENGTH OVERALL EXCEEDING TWO TIMES THE LARGEST OUTSIDE DIAMETER OR WIDTH ACROSS FLATS, USE POST, ELECTRICAL-MECHANICAL EQUIPMENT. FOR ITEMS WITH AN OUTSIDE CONTOUR THAT IS THE SAME THE FULL LENGTH, HAVING A CONTINUOUS THREAD THROUGH ITS ENTIRE LENGTH, AND THE LENGTH DOES NOT EXCEED TWO TIMES THE DIAMETER OR WIDTH ACROSS THE FLATS USE NUT (1), PLAIN (AS MODIFIED). EXCLUDES NUT (1), PLAIN, CAP. SEE ALSO TURNBUCKLE BODY.
|
Manufacturer Information:
| 739029 | 77445 | RTX CORPORATION |
|
Techincal Specification:
| DRILLED HOLE DIAMETER | 0.055 INCHES MINIMUM AND 0.065 INCHES MAXIMUM | | CROSS-SECTIONAL SHAPE | HEXAGONAL FLANGE | | FLANGE THICKNESS | 0.245 INCHES MINIMUM AND 0.265 INCHES MAXIMUM | | FLANGE WIDTH ACROSS FLATS | 0.865 INCHES MINIMUM AND 0.877 INCHES MAXIMUM | | HARDNESS RATING | 42.0 ROCKWELL C MINIMUM | | HOLE CONFIGURATION STYLE | CONFIGURATION B | | HOLE TYPE AND QUANTITY | 2 DRILLED | | MATERIAL | STEEL CORROSION RESISTING OVERALL | | NOMINAL THREAD SIZE | 0.375 INCHES | | NUT DIAMETER | 0.978 INCHES NOMINAL | | NUT LENGTH | 0.926 INCHES MINIMUM AND 0.956 INCHES MAXIMUM | | NUT STYLE | SLEEVE | | SPECIAL FEATURES | CENTER TO CENTER 0.770 IN. | | THREAD CLASS | 3B | | THREAD DIRECTION | RIGHT-HAND | | THREAD SERIES | UNIFIED NATIONAL JOINT FINE (UNJF) | | THREAD QUANTITY PER INCH | 24 |
|
|