|
|
|
National Stock Number:
5310-01-378-8166
Federal Supply Class:
5310
National Item Identification Number:
013788166
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 125M6-A2 | 15526 | METRIC AND MULTISTANDARD COMPONENTS CORP | | 2131030 | U16J8 | ORBITAL FASTENERS LTD. | | DIN 125-A2 6 | 15526 | METRIC AND MULTISTANDARD COMPONENTS CORP | | DIN125-A6.4-A2 | 15526 | METRIC AND MULTISTANDARD COMPONENTS CORP | | DIN125-A6,4-A2 | D9182 | ZF INDUSTRIEANTRIEBE WITTEN GMBH | | DIN125-A6,4-A2 | Y9992 | NAVAL MATERIAL HEADQUARTERS RMN | | DIN125-A6.4-A2 | D8286 | DIN DEUTSCHES INSTITUT FUER NORMUNGEV |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HOLE DIAMETER | 6.40 MILLIMETERS MINIMUM AND 6.62 MILLIMETERS MAXIMUM | | MATERIAL | STEEL COMP 304 OVERALL | | OVERALL DIAMETER | 11.57 MILLIMETERS MINIMUM AND 12.00 MILLIMETERS MAXIMUM | | PERIPHERAL SHAPE STYLE | ROUND | | THICKNESS | 1.4 MILLIMETERS MINIMUM AND 1.8 MILLIMETERS MAXIMUM |
|
|