|
|
|
National Stock Number:
5310-01-366-6344
Federal Supply Class:
5310
National Item Identification Number:
013666344
Description:
NUT,SLEEVE
Detail:
AN INTERNALLY THREADED ITEM WITH A CYLINDRICAL AND/OR SQUARE, HEXAGONAL, OCTAGONAL, OR DODECAGONAL OUTER PERIPHERY (PARALLEL TO THE THREADED AXIS) A PORTION(S) OF WHICH MAY OR MAY NOT BE ENLARGED, FORMING A FLANGE(S) AND/OR SHOULDER(S). ITEMS NOT HAVING AN ENLARGED OUTER PORTION MAY BE THREADED, A PART OF THE FULL LENGTH, OR TAPPED FROM BOTH ENDS. ITEMS HAVING AN ENLARGED OUTER PORTION (FLANGE(S) OR SHOULDER(S)) MAY BE THREADED THE FULL LENGTH, THREADED A PART OF THE FULL LENGTH, OR TAPPED FROM BOTH ENDS. ITEMS TAPPED FROM BOTH ENDS SHALL HAVE EITHER RIGHT-HAND THREADS ON BOTH ENDS OR LEFT-HAND THREADS ON BOTH ENDS. FOR ITEMS CONFORMING TO ANY OF THE ABOVE AND HAVING A LENGTH OVERALL EXCEEDING TWO TIMES THE LARGEST OUTSIDE DIAMETER OR WIDTH ACROSS FLATS, USE POST, ELECTRICAL-MECHANICAL EQUIPMENT. FOR ITEMS WITH AN OUTSIDE CONTOUR THAT IS THE SAME THE FULL LENGTH, HAVING A CONTINUOUS THREAD THROUGH ITS ENTIRE LENGTH, AND THE LENGTH DOES NOT EXCEED TWO TIMES THE DIAMETER OR WIDTH ACROSS THE FLATS USE NUT (1), PLAIN (AS MODIFIED). EXCLUDES NUT (1), PLAIN, CAP. SEE ALSO TURNBUCKLE BODY.
|
Manufacturer Information:
| 537AS477-2 | 05606 | GENERAL DYNAMICS-OTS, INC. | | 537AS477-2 | 30003 | NAVAL AIR SYSTEMS COMMAND MANAGED ORIGINAL DESIGN ACTIVITY NOT MATERIAL/PARTS SUPPLIER |
|
Techincal Specification:
| THREAD SERIES | UNC | | NOMINAL THREAD SIZE | 0.112 INCHES | | THREAD QUANTITY PER INCH | 40 | | THREAD CLASS | 2B | | THREAD DIRECTION | RIGHT-HAND | | MATERIAL | STEEL COMP 1117 OR | | STEEL COMP 11L17 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A108 ASSN STD 1ST MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM AND | | CHROMATE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | HARDNESS RATING | 80.0 ROCKWELL B MAXIMUM | | NUT STYLE | SLEEVE | | NUT LENGTH | 0.106 INCHES NOMINAL | | BOSS DIAMETER | 0.151 INCHES MINIMUM AND | | 0.154 INCHES MAXIMUM FIRST END | | 0.215 INCHES MINIMUM AND | | 0.225 INCHES MAXIMUM SECOND END | | BOSS THICKNESS | 0.132 INCHES MINIMUM AND | | 0.138 INCHES MAXIMUM FIRST END | | 0.125 INCHES MINIMUM AND | | 0.135 INCHES MAXIMUM SECOND END | | NUT WIDTH ACROSS FLATS | 0.250 INCHES NOMINAL | | NUT COUNTERBORE DEPTH | 0.170 INCHES MINIMUM AND | | 0.200 INCHES MAXIMUM FIRST END | | COUNTERBORE DIAMETER | 0.115 INCHES MINIMUM AND | | 0.121 INCHES MAXIMUM FIRST END | | CROSS-SECTIONAL SHAPE | HEXAGONAL OVERALL |
|
|