|
|
|
National Stock Number:
5310-01-353-2057
Federal Supply Class:
5310
National Item Identification Number:
013532057
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 1377172-5 | 87557 | LOCKHEED CORP LOCKHEED ELECTRONICS CO INC | | 1377172-5 | 94117 | BAE SYSTEMS INFORMATION AND ELECTRONIC SYSTEMS INTEGRATION INC. |
|
Techincal Specification:
| MATERIAL | STEEL COMP 302 OR | | STEEL COMP 303 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5515 ASSN STD 1ST MATERIAL RESPONSE OR | | AMS 5640 ASSN STD 2ND MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | CENTER HOLE SHAPE STYLE | ROUND | | HOLE DIAMETER | 0.190 INCHES MINIMUM AND | | 0.192 INCHES MAXIMUM | | PERIPHERAL SHAPE STYLE | ROUND | | OVERALL DIAMETER | 0.307 INCHES MINIMUM AND | | 0.317 INCHES MAXIMUM | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | THICKNESS | 0.0155 INCHES MINIMUM AND | | 0.0165 INCHES MAXIMUM | | SURFACE FINISH | 16.0 MICROINCHES TOP | | 16.0 MICROINCHES BOTTOM | | 32.0 MICROINCHES INNER | | 32.0 MICROINCHES OUTER |
|
|