|
|
|
National Stock Number:
5310-01-326-3475
Federal Supply Class:
5310
National Item Identification Number:
013263475
Description:
WASHER,RECESSED
Detail:
A WASHER OF ANY PERIPHERAL SHAPE HAVING A CENTRALLY LOCATED HOLE. BOTH BEARING SURFACES ARE PARALLEL AND FLAT, BUT ONE OR BOTH OF THE BEARING SURFACES MUST BE BROKEN BY A COUNTERBORE, COUNTERSINK, OR SIMILARLY SHAPED RECESS. THE THICKNESS MUST NOT EXCEED 25 PER CENT OF THE OUTSIDE DIAMETER OR THE LARGEST OUTSIDE DIMENSION. THE MAXIMUM LIMIT OF THE TOLERANCE OR RANGE APPLIED TO THE THICKNESS AND/OR LARGEST OUTSIDE DIMENSION MUST BE USED TO DETERMINE COMPLIANCE. EXCLUDES WASHER, CONCAVE, RETAINER, PACKING, AND THRUST TYPE WASHERS. SEE ALSO SPACER, SLEEVE; AND SPACER, STEPPED.
|
Manufacturer Information:
| 5265301-001 | 53711 | NAVAL SEA SYSTEMS COMMAND | | 685-7458-001 | 13499 | ROCKWELL COLLINS, INC. |
|
Techincal Specification:
| HOLE DIAMETER | 0.164 INCHES NOMINAL | | OUTSIDE DIAMETER | 0.750 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-225/8,T651 FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL THICKNESS | 0.147 INCHES NOMINAL | | MATERIAL | ALUMINUM ALLOY 6061 OVERALL | | SPECIAL FEATURES | 45.0 DEG CHAMFER,RECESS SIDE,LEAVING 0.500 IN. OD FLAT BEARING SURFACE | | RECESS ANGLE | 98.0 DEGREES MINIMUM AND 102.0 DEGREES MAXIMUM | | STYLE DESIGNATOR | RECESSED | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625,TYPE 2,CLASS 2 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | ANODIZE OVERALL |
|
|