|
|
|
National Stock Number:
5310-01-319-6942
Federal Supply Class:
5310
National Item Identification Number:
013196942
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 03A257-5A | 1W025 | NORTHROP GRUMMAN SYSTEMS CORP | | 03A257-5A | 76823 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | AS19879-5A | 10630 | ANILLO INDUSTRIES LLC | | MM118-5A | 58009 | MOELLER MANUFACTURING & SUPPLY, LLC | | NS202860-5A | 80539 | SPS TECHNOLOGIES, LLC | | VN948-5-A | 92215 | HOWMET GLOBAL FASTENING SYSTEMS INC | | VN948BF5 | 92215 | HOWMET GLOBAL FASTENING SYSTEMS INC |
|
Techincal Specification:
| MATERIAL | IRON ALLOY 660 OR | | NICKEL ALLOY 718 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5525 ASSN STD 1ST MATERIAL RESPONSE OR | | AMS 5737 ASSN STD 1ST MATERIAL RESPONSE OR | | AMS 5596 ASSN STD 2ND MATERIAL RESPONSE OR | | AMS 5597 ASSN STD 2ND MATERIAL RESPONSE OR | | AMS 5662 ASSN STD 2ND MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | ALUMINUM ALLOY OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | NAS 4006 ASSN STD SINGLE TREATMENT RESPONSE OVERALL | | CENTER HOLE SHAPE STYLE | ROUND | | HOLE DIAMETER | 0.314 INCHES MINIMUM AND | | 0.318 INCHES MAXIMUM | | PERIPHERAL SHAPE STYLE | ROUND | | OVERALL DIAMETER | 0.575 INCHES MINIMUM AND | | 0.585 INCHES MAXIMUM | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | THICKNESS | 0.057 INCHES MINIMUM AND | | 0.069 INCHES MAXIMUM | | TEST DATA DOCUMENT | 96906-MIL-STD-6866 STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). | | MINIMUM TENSILE STRENGTH | 180000 POUNDS PER SQUARE INCH |
|
|