|
|
|
National Stock Number:
5310-01-313-8538
Federal Supply Class:
5310
National Item Identification Number:
013138538
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 5310PL0787377 | 9009H | INSPEKTORAT WSPARCIA SIL ZBROJNYCH | | ST2159-10 | 62224 | SATELLITE AEROSPACE, INCORPORATED | | ST2159-10 | 77445 | RTX CORPORATION |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HOLE DIAMETER | 0.271 INCHES MINIMUM AND 0.286 INCHES MAXIMUM | | MATERIAL | STEEL CORROSION RESISTING OVERALL | | PERIPHERAL SHAPE STYLE | ROUND | | PROPRIETARY CHARACTERISTICS | PACS | | OVERALL DIAMETER | 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM | | SPECIAL FEATURES | MATT IS AMS 5510 STAINLESS SREEL | | THICKNESS | 0.028 INCHES MINIMUM AND 0.036 INCHES MAXIMUM |
|
|