|
|
|
National Stock Number:
5310-01-311-4614
Federal Supply Class:
5310
National Item Identification Number:
013114614
Description:
NUT,SLEEVE
Detail:
AN INTERNALLY THREADED ITEM WITH A CYLINDRICAL AND/OR SQUARE, HEXAGONAL, OCTAGONAL, OR DODECAGONAL OUTER PERIPHERY (PARALLEL TO THE THREADED AXIS) A PORTION(S) OF WHICH MAY OR MAY NOT BE ENLARGED, FORMING A FLANGE(S) AND/OR SHOULDER(S). ITEMS NOT HAVING AN ENLARGED OUTER PORTION MAY BE THREADED, A PART OF THE FULL LENGTH, OR TAPPED FROM BOTH ENDS. ITEMS HAVING AN ENLARGED OUTER PORTION (FLANGE(S) OR SHOULDER(S)) MAY BE THREADED THE FULL LENGTH, THREADED A PART OF THE FULL LENGTH, OR TAPPED FROM BOTH ENDS. ITEMS TAPPED FROM BOTH ENDS SHALL HAVE EITHER RIGHT-HAND THREADS ON BOTH ENDS OR LEFT-HAND THREADS ON BOTH ENDS. FOR ITEMS CONFORMING TO ANY OF THE ABOVE AND HAVING A LENGTH OVERALL EXCEEDING TWO TIMES THE LARGEST OUTSIDE DIAMETER OR WIDTH ACROSS FLATS, USE POST, ELECTRICAL-MECHANICAL EQUIPMENT. FOR ITEMS WITH AN OUTSIDE CONTOUR THAT IS THE SAME THE FULL LENGTH, HAVING A CONTINUOUS THREAD THROUGH ITS ENTIRE LENGTH, AND THE LENGTH DOES NOT EXCEED TWO TIMES THE DIAMETER OR WIDTH ACROSS THE FLATS USE NUT (1), PLAIN (AS MODIFIED). EXCLUDES NUT (1), PLAIN, CAP. SEE ALSO TURNBUCKLE BODY.
|
Manufacturer Information:
| 40456-1 | 62228 | MEGGITT DEFENSE SYSTEMS, INC. |
|
Techincal Specification:
| THREAD SERIES | UNF | | NOMINAL THREAD SIZE | 0.625 INCHES | | THREAD QUANTITY PER INCH | 18 | | THREAD CLASS | 2B | | THREAD DIRECTION | RIGHT-HAND | | MATERIAL | ALUMINUM ALLOY 6061 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-225/8,T6 FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | ANODIZE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625,TY 2,CL 2 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL | | NUT STYLE | SLEEVE | | THREAD LENGTH | 0.630 INCHES NOMINAL | | NUT LENGTH | 1.620 INCHES NOMINAL | | NUT WIDTH ACROSS FLATS | 1.000 INCHES NOMINAL | | HOLE CONFIGURATION STYLE | CONFIGURATION A | | HOLE TYPE AND QUANTITY | 6 DRILLED | | DRILLED HOLE DIAMETER | 0.189 INCHES MINIMUM AND | | 0.192 INCHES MAXIMUM | | COUNTERSINK ANGLE | 90.0 DEGREES MINIMUM AND | | 100.0 DEGREES MAXIMUM FIRST END | | CROSS-SECTIONAL SHAPE | HEXAGONAL OVERALL | | SPECIAL FEATURES | HOLE 0.565 IN. MIN AND 0.578 IN. MAX DIA DRILLED THRU TO THREADED END |
|
|