|
|
|
National Stock Number:
5310-01-296-7828
Federal Supply Class:
5310
National Item Identification Number:
012967828
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 5266115 | 53711 | NAVAL SEA SYSTEMS COMMAND |
|
Techincal Specification:
| MATERIAL | STEEL OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | AISI-SAE01,DRILL ROD ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | CENTER HOLE SHAPE STYLE | ROUND | | HOLE DIAMETER | 1.003 INCHES MINIMUM AND | | 1.004 INCHES MAXIMUM | | PERIPHERAL SHAPE STYLE | ROUND | | OVERALL DIAMETER | 1.750 INCHES NOMINAL | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | THICKNESS | 0.187 INCHES MINIMUM AND | | 0.189 INCHES MAXIMUM | | OUTSIDE LEFT CORNER CHAMFER ANGLE | 45.0 DEGREES NOMINAL | | INSIDE LEFT CORNER CHAMFER ANGLE | 45.0 DEGREES NOMINAL | | OUTSIDE RIGHT CORNER CHAMFER ANGLE | 45.0 DEGREES NOMINAL | | INSIDE RIGHT CORNER CHAMFER ANGLE | 45.0 DEGREES NOMINAL | | HARDNESS RATING | 58.0 ROCKWELL C MINIMUM AND | | 62.0 ROCKWELL C MAXIMUM |
|
|