|
|
|
National Stock Number:
5310-01-296-5357
Federal Supply Class:
5310
National Item Identification Number:
012965357
Description:
WASHER,LOCK
Detail:
A washer which is usually round with a centrally located hole. Its edges and two bearing surfaces are so designed that applied pressure brings into play the spring tension and/or frictional locking principle which materially resists any tendency toward turning. It may be made of one or two pieces
|
Manufacturer Information:
| 6242930-135 | 53711 | NAVAL SEA SYSTEMS COMMAND |
|
Techincal Specification:
| MATERIAL | STEEL COMP 301 OR | | STEEL COMP 302 OR | | STEEL COMP 302B OR | | STEEL COMP 303 OR | | STEEL COMP 303SE OR | | STEEL COMP 304 OR | | STEEL COMP 304L OR | | STEEL COMP 305 OR | | STEEL COMP 308 OR | | STEEL COMP 309 OR | | STEEL COMP 309S OR | | STEEL COMP 310 OR | | STEEL COMP 310S OR | | STEEL COMP 314 OR | | STEEL COMP 316 OR | | STEEL COMP 316L OR | | STEEL COMP 317 OR | | STEEL COMP 321 OR | | STEEL COMP 347 OR | | STEEL COMP 348 OR | | STEEL COMP 385 OR | | STEEL COMP 384 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD ALL MATERIAL RESPONSES OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-81751,TYPE 1,CLASS 4 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL | | COLOR | GRAY/GREY OVERALL | | STYLE DESIGNATOR | SPLIT HELICAL-RIGHT HAND | | HOLE DIAMETER | 0.115 INCHES MINIMUM AND | | 0.121 INCHES MAXIMUM | | OUTSIDE DIAMETER | 0.209 INCHES MAXIMUM | | MATERIAL THICKNESS | 0.025 INCHES MINIMUM AND | | 0.031 INCHES MAXIMUM |
|