|
|
|
National Stock Number:
5310-01-265-6394
Federal Supply Class:
5310
National Item Identification Number:
012656394
Description:
NUT,SLEEVE
Detail:
AN INTERNALLY THREADED ITEM WITH A CYLINDRICAL AND/OR SQUARE, HEXAGONAL, OCTAGONAL, OR DODECAGONAL OUTER PERIPHERY (PARALLEL TO THE THREADED AXIS) A PORTION(S) OF WHICH MAY OR MAY NOT BE ENLARGED, FORMING A FLANGE(S) AND/OR SHOULDER(S). ITEMS NOT HAVING AN ENLARGED OUTER PORTION MAY BE THREADED, A PART OF THE FULL LENGTH, OR TAPPED FROM BOTH ENDS. ITEMS HAVING AN ENLARGED OUTER PORTION (FLANGE(S) OR SHOULDER(S)) MAY BE THREADED THE FULL LENGTH, THREADED A PART OF THE FULL LENGTH, OR TAPPED FROM BOTH ENDS. ITEMS TAPPED FROM BOTH ENDS SHALL HAVE EITHER RIGHT-HAND THREADS ON BOTH ENDS OR LEFT-HAND THREADS ON BOTH ENDS. FOR ITEMS CONFORMING TO ANY OF THE ABOVE AND HAVING A LENGTH OVERALL EXCEEDING TWO TIMES THE LARGEST OUTSIDE DIAMETER OR WIDTH ACROSS FLATS, USE POST, ELECTRICAL-MECHANICAL EQUIPMENT. FOR ITEMS WITH AN OUTSIDE CONTOUR THAT IS THE SAME THE FULL LENGTH, HAVING A CONTINUOUS THREAD THROUGH ITS ENTIRE LENGTH, AND THE LENGTH DOES NOT EXCEED TWO TIMES THE DIAMETER OR WIDTH ACROSS THE FLATS USE NUT (1), PLAIN (AS MODIFIED). EXCLUDES NUT (1), PLAIN, CAP. SEE ALSO TURNBUCKLE BODY.
|
Manufacturer Information:
| 123BM10066-1 | 1N108 | B & B PRECISION COMPONENTS INC. | | 123BM10066-1 | 26512 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | 123BM10066-1 | 65783 | NAGELE INSTRUMENT AND TOOL CO INC | | 123BM10066-1 | 79RG9 | NORTHROP GRUMMAN SYSTEMS CORPORATION |
|
Techincal Specification:
| THREAD SERIES | UNF | | NOMINAL THREAD SIZE | 0.190 INCHES | | THREAD QUANTITY PER INCH | 32 | | THREAD CLASS | 3B | | THREAD DIRECTION | RIGHT-HAND | | MATERIAL | STEEL COMP 4130 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6758 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL | | NUT STYLE | SLEEVE | | FLANGE THICKNESS | 0.187 INCHES NOMINAL | | NUT DIAMETER | 0.296 INCHES MINIMUM AND | | 0.300 INCHES MAXIMUM | | NUT LENGTH | 0.623 INCHES NOMINAL | | FLANGE WIDTH ACROSS FLATS | 0.490 INCHES MINIMUM AND | | 0.502 INCHES MAXIMUM | | HOLE CONFIGURATION STYLE | CONFIGURATION A | | HOLE TYPE AND QUANTITY | 4 DRILLED | | DRILLED HOLE DIAMETER | 0.066 INCHES MINIMUM AND | | 0.071 INCHES MAXIMUM | | NUT COUNTERBORE DEPTH | 0.285 INCHES MINIMUM AND | | 0.315 INCHES MAXIMUM FLANGE | | COUNTERBORE DIAMETER | 0.190 INCHES MINIMUM AND | | 0.194 INCHES MAXIMUM FLANGE | | COUNTERSINK ANGLE | 60.0 DEGREES NOMINAL BOSS | | 60.0 DEGREES NOMINAL FLANGE | | CROSS-SECTIONAL SHAPE | ROUND BOSS | | HEXAGONAL FLANGE |
|
|