|
|
|
National Stock Number:
5310-01-256-9716
Federal Supply Class:
5310
National Item Identification Number:
012569716
Description:
NUT,PLAIN,HEXAGON
Detail:
A nut, flat on top and bottom having 6 flat sides. For items which have internal tapered or straight (parallel) pipe threads, specific electrical conduit size designation, and which when installed, provide a method of tightening to lock the connection, see LOCKNUT, ELECTRICAL CONDUIT. See also LOCKNUT, TUBE FITTING. For items having a thickness (or height) exceeding two times the width across the flats, use POST, ELECTRICAL-MECHANICAL EQUIPMENT. (When height or thickness and/or width across the flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance.)
|
Manufacturer Information:
| NAS1423-12LH | 80205 | NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE | | PB2AR | 89946 | EATON CORPORATION |
|
Techincal Specification:
| THREAD SERIES | UNJF | | NOMINAL THREAD SIZE | 0.750 INCHES | | THREAD QUANTITY PER INCH | 16 | | THREAD CLASS | 3B | | THREAD DIRECTION | LEFT-HAND | | MATERIAL | STEEL COMP 4130 OR | | STEEL COMP E4340 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6758,COND D-1 OR D-4 OR F-4 MIL SPEC 1ST MATERIAL RESPONSE OR | | MIL-S-5000,COND C-1 OR C-4 MIL SPEC 2ND MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM AND | | CHROMATE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | HARDNESS RATING | 34.0 ROCKWELL C MINIMUM AND | | 38.0 ROCKWELL C MAXIMUM | | NUT STYLE | HEXAGON | | NUT HEIGHT | 0.250 INCHES NOMINAL | | WIDTH ACROSS FLATS | 1.109 INCHES MINIMUM AND | | 1.127 INCHES MAXIMUM | | HOLE CONFIGURATION STYLE | CONFIGURATION B | | HOLE TYPE AND QUANTITY | 3 DRILLED | | DRILLED HOLE DIAMETER | 0.069 INCHES MINIMUM AND | | 0.074 INCHES MAXIMUM | | BEARING SURFACE TYPE | CHAMFERED OR | | WASHER FACED | | COUNTERSINK ANGLE | 110.0 DEGREES NOMINAL BOTH ENDS | | SPECIFICATION/STANDARD DATA | 80205-NAS1423 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD | | BEARING SURFACE FINISH | 125.0 MICROINCHES |
|
|