|
|
|
National Stock Number:
5310-01-254-8288
Federal Supply Class:
5310
National Item Identification Number:
012548288
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 85100015/00030 | 55070 | GOODRICH | | 85100030 | 27541 | TRANSAERO, INC. | | 85100030 | 55070 | GOODRICH | | 85100030 | K0131 | GOODRICH LIMITED | | 85100030 | K4358 | SAFRAN ELECTRICAL & POWER UK LTD | | 85100030 | U0J60 | ONTIC ENGINEERING & MANUFACTURING UK LIMITED |
|
Techincal Specification:
| CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HOLE DIAMETER | 0.4375 INCHES MINIMUM AND 0.4425 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-766 FED SPEC ALL MATERIAL RESPONSES OVERALL | | MATERIAL | STEEL COMP 302 OVERALL OR STEEL COMP 304 OVERALL | | PERIPHERAL SHAPE STYLE | ROUND | | PROPRIETARY CHARACTERISTICS | PACS | | OVERALL DIAMETER | 0.619 INCHES MINIMUM AND 0.624 INCHES MAXIMUM | | THICKNESS | 0.020 INCHES NOMINAL | | CENTER HOLE SHAPE STYLE | ROUND |
|
|