|
|
|
National Stock Number:
5310-01-249-0906
Federal Supply Class:
5310
National Item Identification Number:
012490906
Description:
NUT,SLEEVE
Detail:
AN INTERNALLY THREADED ITEM WITH A CYLINDRICAL AND/OR SQUARE, HEXAGONAL, OCTAGONAL, OR DODECAGONAL OUTER PERIPHERY (PARALLEL TO THE THREADED AXIS) A PORTION(S) OF WHICH MAY OR MAY NOT BE ENLARGED, FORMING A FLANGE(S) AND/OR SHOULDER(S). ITEMS NOT HAVING AN ENLARGED OUTER PORTION MAY BE THREADED, A PART OF THE FULL LENGTH, OR TAPPED FROM BOTH ENDS. ITEMS HAVING AN ENLARGED OUTER PORTION (FLANGE(S) OR SHOULDER(S)) MAY BE THREADED THE FULL LENGTH, THREADED A PART OF THE FULL LENGTH, OR TAPPED FROM BOTH ENDS. ITEMS TAPPED FROM BOTH ENDS SHALL HAVE EITHER RIGHT-HAND THREADS ON BOTH ENDS OR LEFT-HAND THREADS ON BOTH ENDS. FOR ITEMS CONFORMING TO ANY OF THE ABOVE AND HAVING A LENGTH OVERALL EXCEEDING TWO TIMES THE LARGEST OUTSIDE DIAMETER OR WIDTH ACROSS FLATS, USE POST, ELECTRICAL-MECHANICAL EQUIPMENT. FOR ITEMS WITH AN OUTSIDE CONTOUR THAT IS THE SAME THE FULL LENGTH, HAVING A CONTINUOUS THREAD THROUGH ITS ENTIRE LENGTH, AND THE LENGTH DOES NOT EXCEED TWO TIMES THE DIAMETER OR WIDTH ACROSS THE FLATS USE NUT (1), PLAIN (AS MODIFIED). EXCLUDES NUT (1), PLAIN, CAP. SEE ALSO TURNBUCKLE BODY.
|
Manufacturer Information:
| 746199 | 99167 | HAMILTON SUNDSTRAND CORPORATION |
|
Techincal Specification:
| THREAD SERIES | UNEF | | NOMINAL THREAD SIZE | 1.375 INCHES | | THREAD QUANTITY PER INCH | 18 | | THREAD CLASS | 3B | | THREAD DIRECTION | RIGHT-HAND | | MATERIAL | STEEL COMP 4140 OR | | STEEL OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6378 ASSN STD 1ST MATERIAL RESPONSE OR | | MS10.25,CAGEC 99167 MFR REF 2ND MATERIAL RESPONSE OVERALL | | NUT STYLE | SLEEVE | | THREAD LENGTH | 0.245 INCHES MINIMUM AND | | 0.255 INCHES MAXIMUM | | NUT DIAMETER | 1.515 INCHES MINIMUM AND | | 1.535 INCHES MAXIMUM | | NUT LENGTH | 0.475 INCHES MINIMUM AND | | 0.495 INCHES MAXIMUM | | CROSS-SECTIONAL SHAPE | ROUND OVERALL | | SPECIAL FEATURES | HOLE LOCATED ON UNTHREADED END | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 99167 | | DESIGN CONTROL REFERENCE | 746199 |
|
|