|
|
|
National Stock Number:
5310-01-248-0459
Federal Supply Class:
5310
National Item Identification Number:
012480459
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| DGR298L | 16712 | SIEMENS ENERGY, INC. | | DGR298L | 17454 | TIMKEN GEARS & SERVICES INC. | | DGR298LVM | 03950 | NAVAL INVENTORY CONTROL POINT MECHANICSBURG | | DGR4350B PT215VM | 03950 | NAVAL INVENTORY CONTROL POINT MECHANICSBURG | | DGR4350B PT215 | 16712 | SIEMENS ENERGY, INC. | | DGR298LVM | 17454 | TIMKEN GEARS & SERVICES INC. | | DGR4350C PT215VM | 03950 | NAVAL INVENTORY CONTROL POINT MECHANICSBURG | | DGR4350C PT215 | 16712 | SIEMENS ENERGY, INC. |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HOLE DIAMETER | 0.531 INCHES NOMINAL | | PERIPHERAL SHAPE STYLE | SQUARE | | REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS | MAGNETIC PERMEABILITY SHALL NOT EXCEED 2.0 AFTER FABRICATION | | THICKNESS | 0.120 INCHES NOMINAL | | WIDTH ACROSS FLATS | 1.500 INCHES NOMINAL |
|
|