| LOCKING FEATURE | PREVAILING TORQUE ALL METAL DESIGN |
| THREAD DIRECTION | RIGHT-HAND |
| NUT STYLE | PLATE |
| MATERIAL | STEEL COMP 631 BASE |
| STEEL COMP 4130 OR |
| STEEL COMP 8740 NUT |
| STEEL COMP 631 CLIP |
| THREAD SERIES | UNJF |
| NOMINAL THREAD SIZE | 0.190 INCHES |
| THREAD QUANTITY PER INCH | 32 |
| THREAD CLASS | 3B |
| SURFACE TREATMENT | PASSIVATE BASE |
| CADMIUM OR |
| CADMIUM AND |
| CHROMATE NUT |
| PASSIVATE CLIP |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE BASE |
| QQ-P-416,CL 2 FED SPEC 1ST TREATMENT RESPONSE OR |
| QQ-P-416,TY 2 FED SPEC 2ND TREATMENT RESPONSE NUT |
| QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE CLIP |
| NUT LENGTH | 1.360 INCHES MINIMUM AND |
| 1.390 INCHES MAXIMUM |
| NUT HEIGHT | 0.403 INCHES MAXIMUM |
| PLATE THICKNESS | 0.023 INCHES MINIMUM AND |
| 0.027 INCHES MAXIMUM |
| PLATE WIDTH | 0.865 INCHES MAXIMUM |
| NUT COUNTERBORE DEPTH | 0.258 INCHES MINIMUM AND |
| 0.268 INCHES MAXIMUM BASE |
| COUNTERBORE DIAMETER | 0.195 INCHES MINIMUM AND |
| 0.200 INCHES MAXIMUM BASE |
| LUBRICATION | DRY FILM LUBRICANT |
| MOUNTING HOLE ARRANGEMENT STYLE | 2 HOLES |
| MOUNTING HOLE DIAMETER | 0.098 INCHES MINIMUM AND |
| 0.103 INCHES MAXIMUM |
| DISTANCE FROM APERTURE CENTER TO MOUNTING HOLE CENTER | 0.557 INCHES MINIMUM AND |
| 0.567 INCHES MAXIMUM |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH | 1.123 INCHES MINIMUM AND |
| 1.127 INCHES MAXIMUM |
| SPECIAL FEATURES | SURFACE TREATMENTMUST MEET SALT SPRAY TEST REQUIREMENTS OF QQ-P-416,TY 2; SPRING LOADED BOSS EXTENDS BELOW BASE |
| SPECIFICATION/STANDARD DATA | 80205-NAS1803 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |