|
|
|
National Stock Number:
5310-01-206-2988
Federal Supply Class:
5310
National Item Identification Number:
012062988
Description:
NUT SPACER,PLATE
Detail:
AN ITEM HAVING TWO FLAT BEARING SURFACES, CONFORMING TO THE SAME SHAPE AS THE BASE OF A NUT (1), PLAIN, PLATE AND NUT (1), SELF-LOCKING, PLATE. IT IS USED TO PROVIDE BETTER ALIGNMENT IN ASSEMBLY.
|
Manufacturer Information:
| 0N327254-1 | 98230 | NATIONAL SECURITY AGENCY |
|
Techincal Specification:
| MATERIAL | STEEL COMP 302 OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | NUT STYLE | PLATE NUT SPACER | | NUT LENGTH | 0.490 INCHES MINIMUM AND | | 0.510 INCHES MAXIMUM | | THRU-HOLE DIAMETER | 0.086 INCHES NOMINAL | | PLATE THICKNESS | 0.010 INCHES NOMINAL | | PLATE WIDTH | 0.170 INCHES MINIMUM AND | | 0.190 INCHES MAXIMUM | | HOLE CONFIGURATION STYLE | CONFIGURATION G | | HOLE TYPE AND QUANTITY | 2 DRILLED AND | | 2 TAPPED | | DRILLED HOLE DIAMETER | 0.086 INCHES NOMINAL | | HOLE NOMINAL THREAD DIAMETER | 0.086 INCHES | | HOLE THREAD QUANTITY PER INCH | 56 | | NUT MOUNTING PROVISION | STRAIGHT HOLES | | MOUNTING HOLE ARRANGEMENT STYLE | 2 HOLES | | MOUNTING HOLE DIAMETER | 0.086 INCHES NOMINAL | | DISTANCE FROM MOUNTING HOLE CENTER TO BASE | 0.090 INCHES NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG WIDTH | 0.188 INCHES NOMINAL | | TEST DATA DOCUMENT | 98230-0N327254 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 98230 | | DESIGN CONTROL REFERENCE | 0N327254-1 |
|
|