|
|
|
National Stock Number:
5310-01-191-0453
Federal Supply Class:
5310
National Item Identification Number:
011910453
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 1S-765-5B PIECE 24 | 85130 | FLOWSERVE CORPORATION DIV FLOWSERVE US INC |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | FEATURES PROVIDED | CASEHARDENED | | HARDNESS RATING | 800.0 BRINELL MINIMUM | | HOLE DIAMETER | 4.640 INCHES MINIMUM AND 4.650 INCHES MAXIMUM | | OVERALL DIAMETER | 5.250 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | AISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 1040 OVERALL | | PERIPHERAL SHAPE STYLE | ROUND | | SURFACE FINISH | 63.0 MICROINCHES BOTTOM | | SURFACE FINISH | 63.0 MICROINCHES TOP | | THICKNESS | 0.149 INCHES MINIMUM AND 0.159 INCHES MAXIMUM |
|
|