|
|
|
National Stock Number:
5310-01-191-0451
Federal Supply Class:
5310
National Item Identification Number:
011910451
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 120002-24 | 99657 | MAROTTA CONTROLS INC | | 217925 PIECE 105 | 99657 | MAROTTA CONTROLS INC |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HOLE DIAMETER | 0.190 INCHES MINIMUM AND 0.193 INCHES MAXIMUM | | OVERALL DIAMETER | 0.430 INCHES MINIMUM AND 0.440 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763 FED SPEC ALL MATERIAL RESPONSES OVERALL | | MATERIAL | STEEL COMP 302 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 309 OR STEEL COMP 310 OR STEEL COMP 316 OR STEEL COMP 317 OR STEEL COMP 321 OR STEEL COMP 322 OR STEEL COMP 324 OR STEEL COMP 347 OVERALL | | PERIPHERAL SHAPE STYLE | ROUND | | THICKNESS | 0.040 INCHES MINIMUM AND 0.050 INCHES MAXIMUM |
|
|