|
|
|
National Stock Number:
5310-01-183-4984
Federal Supply Class:
5310
National Item Identification Number:
011834984
Description:
NUT,SLEEVE
Detail:
AN INTERNALLY THREADED ITEM WITH A CYLINDRICAL AND/OR SQUARE, HEXAGONAL, OCTAGONAL, OR DODECAGONAL OUTER PERIPHERY (PARALLEL TO THE THREADED AXIS) A PORTION(S) OF WHICH MAY OR MAY NOT BE ENLARGED, FORMING A FLANGE(S) AND/OR SHOULDER(S). ITEMS NOT HAVING AN ENLARGED OUTER PORTION MAY BE THREADED, A PART OF THE FULL LENGTH, OR TAPPED FROM BOTH ENDS. ITEMS HAVING AN ENLARGED OUTER PORTION (FLANGE(S) OR SHOULDER(S)) MAY BE THREADED THE FULL LENGTH, THREADED A PART OF THE FULL LENGTH, OR TAPPED FROM BOTH ENDS. ITEMS TAPPED FROM BOTH ENDS SHALL HAVE EITHER RIGHT-HAND THREADS ON BOTH ENDS OR LEFT-HAND THREADS ON BOTH ENDS. FOR ITEMS CONFORMING TO ANY OF THE ABOVE AND HAVING A LENGTH OVERALL EXCEEDING TWO TIMES THE LARGEST OUTSIDE DIAMETER OR WIDTH ACROSS FLATS, USE POST, ELECTRICAL-MECHANICAL EQUIPMENT. FOR ITEMS WITH AN OUTSIDE CONTOUR THAT IS THE SAME THE FULL LENGTH, HAVING A CONTINUOUS THREAD THROUGH ITS ENTIRE LENGTH, AND THE LENGTH DOES NOT EXCEED TWO TIMES THE DIAMETER OR WIDTH ACROSS THE FLATS USE NUT (1), PLAIN (AS MODIFIED). EXCLUDES NUT (1), PLAIN, CAP. SEE ALSO TURNBUCKLE BODY.
|
Manufacturer Information:
|
Techincal Specification:
| THREAD SERIES | UNJEF | | NOMINAL THREAD SIZE | 0.875 INCHES | | THREAD QUANTITY PER INCH | 20 | | THREAD CLASS | 3B | | THREAD DIRECTION | RIGHT-HAND | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS6487,H-11 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | THREAD LENGTH | 0.625 INCHES NOMINAL | | NUT DIAMETER | 1.080 INCHES MINIMUM AND | | 1.085 INCHES MAXIMUM | | NUT LENGTH | 2.420 INCHES MINIMUM AND | | 2.440 INCHES MAXIMUM | | SPECIAL FEATURES | SURFACE FINISH 2.0 PER TRW SPEC.03-10099 | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 59875 | | DESIGN CONTROL REFERENCE | 217119 |
|
|