|
|
|
National Stock Number:
5310-01-167-3874
Federal Supply Class:
5310
National Item Identification Number:
011673874
Description:
NUT,PLAIN,ROUND
Detail:
A nut, circular in shape, which may have wrenching facilities such as flats, holes, protrusions, slots or splines in or on the periphery or in the face opposite the bearing surface. For items having a thickness (or height) exceeding two times the outside diameter, use POST, ELECTRICAL-MECHANICAL EQUIPMENT. See also NUT (1), PLAIN, KNURLED. (When height or thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance.)
|
Manufacturer Information:
| 1210301 | 10001 | NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER |
|
Techincal Specification:
| THREAD SERIES | UNF | | NOMINAL THREAD SIZE | 0.190 INCHES | | THREAD QUANTITY PER INCH | 32 | | THREAD CLASS | 2B | | THREAD DIRECTION | RIGHT-HAND | | MATERIAL | STEEL OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | 1010-1020 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | NUT STYLE | ROUND | | DRIVE POINT DEPTH | 0.125 INCHES NOMINAL | | NUT DIAMETER | 0.478 INCHES MINIMUM AND | | 0.480 INCHES MAXIMUM | | NUT THICKNESS | 0.200 INCHES NOMINAL | | DRIVE POINT DIAMETER | 0.116 INCHES MINIMUM AND | | 0.169 INCHES MAXIMUM | | COUNTERSINK ANGLE | 45.0 DEGREES NOMINAL OVERALL | | SPECIAL FEATURES | DRILL AND TAP ONE HOLE THRU TO CENTER ON OUTER CIRCUMFERENCE NO. 6-32 UNC-2B | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 10001 | | DESIGN CONTROL REFERENCE | 1210301 |
|
|