|
|
|
National Stock Number:
5310-01-160-2043
Federal Supply Class:
5310
National Item Identification Number:
011602043
Description:
NUT,SLEEVE
Detail:
AN INTERNALLY THREADED ITEM WITH A CYLINDRICAL AND/OR SQUARE, HEXAGONAL, OCTAGONAL, OR DODECAGONAL OUTER PERIPHERY (PARALLEL TO THE THREADED AXIS) A PORTION(S) OF WHICH MAY OR MAY NOT BE ENLARGED, FORMING A FLANGE(S) AND/OR SHOULDER(S). ITEMS NOT HAVING AN ENLARGED OUTER PORTION MAY BE THREADED, A PART OF THE FULL LENGTH, OR TAPPED FROM BOTH ENDS. ITEMS HAVING AN ENLARGED OUTER PORTION (FLANGE(S) OR SHOULDER(S)) MAY BE THREADED THE FULL LENGTH, THREADED A PART OF THE FULL LENGTH, OR TAPPED FROM BOTH ENDS. ITEMS TAPPED FROM BOTH ENDS SHALL HAVE EITHER RIGHT-HAND THREADS ON BOTH ENDS OR LEFT-HAND THREADS ON BOTH ENDS. FOR ITEMS CONFORMING TO ANY OF THE ABOVE AND HAVING A LENGTH OVERALL EXCEEDING TWO TIMES THE LARGEST OUTSIDE DIAMETER OR WIDTH ACROSS FLATS, USE POST, ELECTRICAL-MECHANICAL EQUIPMENT. FOR ITEMS WITH AN OUTSIDE CONTOUR THAT IS THE SAME THE FULL LENGTH, HAVING A CONTINUOUS THREAD THROUGH ITS ENTIRE LENGTH, AND THE LENGTH DOES NOT EXCEED TWO TIMES THE DIAMETER OR WIDTH ACROSS THE FLATS USE NUT (1), PLAIN (AS MODIFIED). EXCLUDES NUT (1), PLAIN, CAP. SEE ALSO TURNBUCKLE BODY.
|
Manufacturer Information:
| 7N8775 | 11083 | CATERPILLAR INC |
|
Techincal Specification:
| THREAD SERIES | UNC | | NOMINAL THREAD SIZE | 0.312 INCHES | | THREAD QUANTITY PER INCH | 18 | | THREAD CLASS | 2B | | THREAD DIRECTION | RIGHT-HAND | | MATERIAL | STEEL COMP 1215 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | 1E303,FSCM 11083 MFR REF SINGLE MATERIAL RESPONSE OVERALL | | NUT STYLE | SLEEVE | | FLANGE THICKNESS | 4.05 MILLIMETERS MINIMUM AND | | 4.55 MILLIMETERS MAXIMUM | | NUT DIAMETER | 12.45 MILLIMETERS MINIMUM AND | | 12.95 MILLIMETERS MAXIMUM | | NUT LENGTH | 6.45 MILLIMETERS MINIMUM AND | | 6.95 MILLIMETERS MAXIMUM | | FLANGE WIDTH ACROSS FLATS | 12.7 MILLIMETERS NOMINAL | | CROSS-SECTIONAL SHAPE | ROUND BOSS | | HEXAGONAL FLANGE | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 11083 | | DESIGN CONTROL REFERENCE | 7N8775 |
|
|