5310-01-151-1037 WASHER,FLAT Index 5330-01-151-1040 PACKING,PREFORMED

National Stock Number:
5310-01-151-1038

Federal Supply Class:
5310

National Item Identification Number:
011511038

Description:
WASHER,FLAT

Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.


Manufacturer Information:
627126511862GENERAL MOTORS CORP CHEVROLET MOTOR DIV SPECIAL PRODUCTS DEPT
62712657X677GENERAL MOTORS LLC


Techincal Specification:
MATERIALSTEEL COMP 1050 OR
STEEL COMP 1551 OR
STEEL COMP 1552 OR
STEEL COMP 1053 OR
STEEL COMP 1054 OR
STEEL COMP 1055 OR
STEEL COMP 1059 OR
STEEL COMP 1060 OR
STEEL COMP 1561 OR
STEEL COMP 1062 OR
STEEL COMP 1064 OR
STEEL COMP 1065 OR
STEEL COMP 1566 OR
STEEL COMP 1069 OR
STEEL COMP 1070 OVERALL
SURFACE TREATMENTZINC AND
DICHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONGM 4342-M CODE 20 FSCM 11862 MFR REF SINGLE TREATMENT RESPONSE OVERALL
CENTER HOLE SHAPE STYLEROUND
HOLE DIAMETER0.656 INCHES NOMINAL
PERIPHERAL SHAPE STYLEROUND W/FLATS
OVERALL DIAMETER1.120 INCHES NOMINAL
WIDTH ACROSS FLATS1.060 INCHES NOMINAL
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
THICKNESS0.109 INCHES NOMINAL
COLORYELLOW OVERALL


Click here to Register for Free 30-day Trial