|
|
|
National Stock Number:
5310-01-147-8748
Federal Supply Class:
5310
National Item Identification Number:
011478748
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 328131 | 11862 | GENERAL MOTORS CORP CHEVROLET MOTOR DIV SPECIAL PRODUCTS DEPT | | 328131 | 7X677 | GENERAL MOTORS LLC |
|
Techincal Specification:
| MATERIAL | STEEL COMP 1060 OR | | STEEL COMP 1064 OR | | STEEL COMP 1065 OR | | STEEL COMP 1070 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | SAE ASSN STD ALL MATERIAL RESPONSES OVERALL | | SURFACE TREATMENT | ZINC AND | | CHROMATE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | 4342-M,FSCM 11862 MFR REF SINGLE TREATMENT RESPONSE OVERALL | | CENTER HOLE SHAPE STYLE | ROUND | | HOLE DIAMETER | 0.812 INCHES MINIMUM AND | | 0.842 INCHES MAXIMUM | | PERIPHERAL SHAPE STYLE | ROUND | | OVERALL DIAMETER | 1.560 INCHES NOMINAL | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | THICKNESS | 0.115 INCHES MINIMUM AND | | 0.131 INCHES MAXIMUM | | COLOR | YELLOW OVERALL | | HARDNESS RATING | 40.0 ROCKWELL C MINIMUM AND | | 45.0 ROCKWELL C MAXIMUM | | HEAT TREATMENT | QUENCHED AND | | TEMPERED |
|
|