|
|
|
National Stock Number:
5310-01-147-0324
Federal Supply Class:
5310
National Item Identification Number:
011470324
Description:
WASHER,RECESSED
Detail:
A WASHER OF ANY PERIPHERAL SHAPE HAVING A CENTRALLY LOCATED HOLE. BOTH BEARING SURFACES ARE PARALLEL AND FLAT, BUT ONE OR BOTH OF THE BEARING SURFACES MUST BE BROKEN BY A COUNTERBORE, COUNTERSINK, OR SIMILARLY SHAPED RECESS. THE THICKNESS MUST NOT EXCEED 25 PER CENT OF THE OUTSIDE DIAMETER OR THE LARGEST OUTSIDE DIMENSION. THE MAXIMUM LIMIT OF THE TOLERANCE OR RANGE APPLIED TO THE THICKNESS AND/OR LARGEST OUTSIDE DIMENSION MUST BE USED TO DETERMINE COMPLIANCE. EXCLUDES WASHER, CONCAVE, RETAINER, PACKING, AND THRUST TYPE WASHERS. SEE ALSO SPACER, SLEEVE; AND SPACER, STEPPED.
|
Manufacturer Information:
| 78076C-18 | 56878 | SPS TECHNOLOGIES, LLC |
|
Techincal Specification:
| MATERIAL | NICKEL ALLOY 718 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5663 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 TYPE I FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | HARDNESS RATING | 34.0 ROCKWELL C MINIMUM | | STYLE DESIGNATOR | RECESSED | | HOLE DIAMETER | 1.127 INCHES MINIMUM AND | | 1.131 INCHES MAXIMUM | | OUTSIDE DIAMETER | 2.120 INCHES MINIMUM AND | | 2.130 INCHES MAXIMUM | | RECESS DIAMETER | 1.273 INCHES MINIMUM AND | | 1.283 INCHES MAXIMUM | | MATERIAL THICKNESS | 0.099 INCHES MINIMUM AND | | 0.119 INCHES MAXIMUM | | RECESS ANGLE | 45.0 DEGREES NOMINAL |
|
|