|
|
|
National Stock Number:
5310-01-145-6158
Federal Supply Class:
5310
National Item Identification Number:
011456158
Description:
NUT,PLAIN,HEXAGON
Detail:
A nut, flat on top and bottom having 6 flat sides. For items which have internal tapered or straight (parallel) pipe threads, specific electrical conduit size designation, and which when installed, provide a method of tightening to lock the connection, see LOCKNUT, ELECTRICAL CONDUIT. See also LOCKNUT, TUBE FITTING. For items having a thickness (or height) exceeding two times the width across the flats, use POST, ELECTRICAL-MECHANICAL EQUIPMENT. (When height or thickness and/or width across the flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance.)
|
Manufacturer Information:
| AN316C8 | 80205 | NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE | | AN316C8 | 88044 | AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE | | FF-N-836 | 81348 | FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC | | AN316C8 | D9182 | ZF INDUSTRIEANTRIEBE WITTEN GMBH |
|
Techincal Specification:
| BEARING SURFACE TYPE | CHAMFEREDCHAMFERED | | COUNTERSINK ANGLE | 110.0 DEGREES NOMINAL BOTH ENDS110.0 DEGREES NOMINAL BOTH ENDS | | MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD ALL MATERIAL RESPONSES OVERALL66 FED STD ALL MATERIAL RESPONSES OVERALL | | MATERIAL | STEEL COMP 302 OR STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 305 OR STEEL COMP 316 OR STEEL COMP 316 OR STEEL COMP 317 OR STEEL COMP 317 OR STEEL COMP 347 OR STEEL COMP 347 OR STEEL COMP 410 OR STEEL COMP 410 OR STEEL COMP 414 OR STEEL COMP 414 OR STEEL COMP 416 OVERALLSTEEL COMP 416 OVERALL | | NOMINAL THREAD SIZE | 0.500 INCHES0.500 INCHES | | NONDEFINITIVE SPEC/STD DATA | 2 TYPE AND 2 TYPE AND 5 STYLE5 STYLE | | NUT HEIGHT | 0.250 INCHES NOMINAL0.250 INCHES NOMINAL | | NUT STYLE | HEXAGONHEXAGON | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALLQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALLPASSIVATE OVERALL | | THREAD CLASS | 3B3B | | THREAD DIRECTION | RIGHT-HANDRIGHT-HAND | | THREAD QUANTITY PER INCH | 2020 | | THREAD SERIES | UNFUNF | | WIDTH ACROSS FLATS | 0.738 INCHES MINIMUM AND 0.738 INCHES MINIMUM AND 0.752 INCHES MAXIMUM0.752 INCHES MAXIMUM |
|
|