5310-01-141-6671 NUT,PLAIN,HEXAGON Index 5310-01-141-6673 WASHER,LOCK

National Stock Number:
5310-01-141-6672

Federal Supply Class:
5310

National Item Identification Number:
011416672

Description:
WASHER,FLAT

Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.


Manufacturer Information:
004-003081-01126916NORTHROP GRUMMAN SYSTEMS CORPORATION
10062855A486GNIMIKKEISTOKESKUS NCB FINLAND
4197410-2605869RAYTHEON COMPANY
401-6357235-6953711NAVAL SEA SYSTEMS COMMAND
18100-03274025MARATHONNORCO AEROSPACE, INC.
153-0013-00494756THE BOEING COMPANY
43171-1705464INDUSTRIAL ELECTRONIC ENGINEERS, INC.
945723-204206481NORTHROP GRUMMAN SYSTEMS CORPORATION
925001-000365597THALES USA, INC.
AN960-4C88044AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE
5310PL01396799009HINSPEKTORAT WSPARCIA SIL ZBROJNYCH
5310PL13808819009HINSPEKTORAT WSPARCIA SIL ZBROJNYCH
5310000221430A00AME.C.A ETABLISSEMENT CENTRAL DESAPPROVISIONNEMENTS DES FORCES ARMEE
938.77.61.005S4080PILATUS AIRCRAFT LTD
CS260-211332GENERAL MICROWAVE CORPORATION
AN960C480205NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE
AN960C481352AIR FORCE-NAVY AERONAUTICAL SPECIFICATIONS PROMULGATED BY AERONAUTICAL STANDARDS GROUP
AN960C488044AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE
AN960C496906MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
CS260-2C1834KONTRON AG
B68075K0967MBDA UK LTD


Techincal Specification:
CENTER HOLE SHAPE STYLEROUND
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
HOLE DIAMETER0.125 INCHES NOMINAL
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-5059 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL OR MIL-S-6721 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
MATERIALSTEEL CORROSION RESISTING OVERALL
PERIPHERAL SHAPE STYLEROUND
PROPRIETARY CHARACTERISTICSPACS
OVERALL DIAMETER0.307 INCHES MINIMUM AND 0.332 INCHES MAXIMUM
THICKNESS0.016 INCHES MINIMUM AND 0.035 INCHES MAXIMUM


Click here to Register for Free 30-day Trial

© 2026 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us